Construction

PolyFM™ Injection Grouts are hydrophobic polyurethane injection grouts designed to permanently seal water leaks and fill voids in concrete and masonry structures. Upon contact with water, these resins rapidly expand to form a tough, flexible, and resilient closed-cell foam, creating a permanent watertight barrier.

PolyFM™-LV is a low viscosity, two-component resin available in convenient dual cartridges for repairing wider cracks and voids.

TECHNICAL SPECIFICATIONS

• Pot Life: 40min (100 g - ASTM D-2471)
• Mix Ratio: 1A to 1B by volume
• Mixed Viscosity: 400 cps
• Mixed Color: Amber
• Foam Expansion: Up to 10x Original Volume
• Water Absorption:: < 1% (ASTM D-2127)
• Density (Free Rise): 8 lbs/ft3 (ASTM D-1622)
• Density (Restricted): 8 lbs/ft3 (ASTM D-1622)
• Tensile (Free Rise): 320 psi (ASTM D-638)
• Elongation(Free Rise): 100% (ASTM D-638)
• Shrinkage:< 1% (ASTM D-2126)

PolyFM-1C™ Injection Grout is a high-performance blend of hydrophilic and hydrophobic polyurethane resins, engineered for reliable crack repair and void grouting. When exposed to water, it expands up to 10 times its original volume to create a permanent, flexible, and watertight seal. Easy to use and clean, PolyFM-1C eliminates the need for costly equipment or messy setups. It comes packaged in convenient 10 fl. oz. caulk-style cartridges that fit any standard caulk gun, making application fast and simple.

TECHNICAL SPECIFICATIONS

• Pot Life (once injected): 2 min. (Stays liquid in cartridge)
• Mix Ratio: Single Component
• Cure Time: 2 Hours Minimum
• Viscosity: 600 cps
• Color: Clear Amber
• Tensile Strength (Restricted): 2.02 lbs/ft³ (ASTM D-1622)
• Tensile Strength (Free Rise): 2.02 lbs/ft³ (ASTM D-1622)
• Elongation: 400% (ASTM D-638)
• Tear Strength (Restricted): 400psi (ASTM D-624)
• Tear Strength (Free Rise): 55psi (ASTM D-624)

GelFoam™ Injection Grout is an innovative and simple to use hydrophilic polyurethane resin system designed to provide the ultimate solution for crack repair and void grouting applications. In contact with water, GelFoam will expand up to 20 times its original volume creating a permanent, flexible and water tight seal. GelFoam eliminates the need for costly equipment and messy cleanups. GelFoam™ is a super low viscosity, single component resin that is ideal for sealing fine cracks.

TECHNICAL SPECIFICATIONS

• Mix Ratio: 1A to 1 Part Water By Volume
• Working Time: 60 sec.(73°F - 23°C)
• Cure Time: 90 min. (73°F - 23°C)
• Viscosity: 230 cps
• Tensile Strength: 375 psi (ASTM D-1623)
• Elongation: 410% (ASTM D-1623)
• Shear Strength: 175 psi (ASTM D-273)
• Color: Milky White

PolyFM™ Injection Grouts are hydrophobic polyurethane injection grouts designed to permanently seal water leaks and fill voids in concrete and masonry structures. Upon contact with water, these resins rapidly expand to form a tough, flexible, and resilient closed-cell foam, creating a permanent watertight barrier.

PolyFM™-SLV is a super low viscosity, single component resin that is ideal for sealing fine cracks.

TECHNICAL SPECIFICATIONS

• Pot Life: 6min (100g - ASTM D-2471)
• Mix Ratio: Single Component
• Cure Time: 45 min.
• Viscosity: 200 cps
• Color: Amber
• Solids Content: 100%
• Density (Free Rise): 2.02 lbs/ft³ (ASTM D-1622)
• Elongation: 60% (ASTM D-1623)
• Tensile Strength: 29 psi (ASTM D-1623)
• Shrinkage:0% (ASTM D-2126)

Granite Flex™ Epoxy Adhesive is a flexible adhesive, specially formulated to provide up to 40% elongation when cured. This flexibility allows for thermal expansion, vibration absorption, and substrate movement without bond failure, while maintaining durable and reliable adhesion performance.

Granite Flex™ is ideally suited for bonding ceramic tile, stone, and masonry in demanding industrial or agricultural environments, as well as for countertop assembly and structural joint repair. Its solvent-free, water-cleanable formulation makes it practical to apply and safe to use in enclosed spaces.

TECHNICAL SPECIFICATIONS

• Mix Ratio: 1A:1B by volume
• Mixed Viscosity: Heavy Paste
• Pot Life: 4 Hours (100g) (ASTM D2471)
• Cure Time: 16 Hours
• Shore Hardness: 45D (ASTM D2240)
• Color: Light Tan
• Die C Tear Strength: 83 pli
• Specific Volume (Mixed): 17.55 cu in/lb (ASTM D792)
• Tensile Strength: 823 psi (ASTM D638)
• Elongation at Break: 40% (ASTM D638)

Polygem injection ports are made from durable, chemical-resistant plastic, often translucent or clear, designed specifically for low-pressure epoxy or polurethane injection into concrete cracks, with integrated caps to manage the flow of repair materials. Package of 50.

Specifically crafted for corner cracks, ensuring precise placement and superior epoxy distribution in hard-to-reach areas., Compatible with Polygem Epoxy Systems. Optimized for use with Polygem’s high-strength Epoxy Injection System, ensuring professional-grade results in concrete repair. Made from durable, chemical-resistant, non-reactive plastic that ensures long-lasting performance.

A compact, disposable mixing nozzle designed to blend two-part polyurethane components (Part A resin and Part B hardener) as they are dispensed. With a 1/4" diameter internal flow path, it provides thorough mixing in a small, controlled stream, making it ideal for precision casting, bonding, sealing, and potting applications. The static mixing elements inside ensure consistent ratio blending, reduced air entrapment, and uniform material performance without the need for manual stirring.

A compact, disposable mixing nozzle designed to blend two-part polyurethane components as they are dispensed. With a 1/2" diameter internal flow path, it provides thorough mixing in a small, controlled stream, making it ideal for precision casting, bonding, sealing, and potting applications. The static mixing elements inside ensure consistent ratio blending, reduced air entrapment, and uniform material performance without the need for manual stirring.

Plastic retaining nut for attaching Epoxy and Foam Static Mixing Tubes. Nut fits 1/4 to 1/2 inch OD epoxy and polyurethane static mixing nozzles.

The M300LV Dispensing Gun is a high-performance manual applicator designed for dispensing low-viscosity, two-part polyurethane, epoxy, and silicone materials from dual-cartridge systems. Built for smooth operation and precise control, it ensures accurate mixing and consistent material flow when used with compatible static mixing nozzles. Its durable construction makes it ideal for casting, bonding, sealing, and potting applications where reliable dispensing and repeatable results are required.

The M300X Dispensing Gun is a heavy-duty manual applicator engineered for dispensing medium- to high-viscosity, two-part polyurethane, epoxy, and silicone materials from dual-cartridge systems. Designed for strength, durability, and consistent performance, it delivers precise control and reliable material flow when paired with compatible static mixing nozzles. Ideal for demanding casting, bonding, sealing, and potting applications, the M300X ensures accurate dispensing and uniform results in professional and industrial environments