The LCR Crack Repair kit contains enough material to repair an average 1/16" wide, eight foot crack. LCR is ideal for homeowners, contractors, remodelers, maintenance personnel and D.I.Y. users. Dispenses with standard 10 oz caulking gun not included.

The LCR Crack Repair Kit contains:

• Two ten-ounce cartridges of liquid injection repair epoxy
• Pint of A & B crack sealer pastes
• Seven injection ports

LCR™ Epoxy Injection Resin is a 100% solids, two-component, moisture insensitive epoxy designed to permanently restore structure and design strength to cracked concrete structures. Unique wetting properties allow maximum penetration of LCR into cracks above .005”. LCR liquid concrete repair injection epoxy can be used on wet or dry surfaces, as well as underwater.

TECHNICAL SPECIFICATIONS

• Working Time: 55 min.(73°F - 23°C)
• Cure Time: 90 min. (73°F - 23°C)
• Working Time: 30 min. (73°F - 23°C)
• Thin Film Set Time: 2-3 hrs. (73°F - 23°C)
• Full Cure Time: 24 hrs.
• Compressive Strength: 7,908 psi (ASTM D-695)
• Compressive Modulus: 135 ksi (ASTM D-695)
• Tensile Strength: 5,868 psi (ASTM D-698)
• Flexural Modulus: 270 ksi (ASTM D-790)
• Flexural Strength: 948 psi (ASTM D-790)
• Elongation at Break: 2.73% (ASTM D-638)
• Shrinkage:.0.001 in./in.
• Heat Deflection Temp: (at 66 psi) 120 °F (49 °C)
• Shore D Hardness: 80D (ASTM D2240)
• Low Viscosity Cartridge (LV): 580 cps
• High Viscosity Cartridge (HV): 1,910 cps

LCR Liquid Concrete Repair Injection Ports are affixed to the surface of the crack to provide for the injection of the LCR - Liquid Injection Epoxy Resin to fill and seal cracked concrete foundation walls. Bag of 7.

LCR™ EPOXY REPAIR PASTE is a high strength two-component, moisture insensitive epoxy with many uses. The paste bonds easily to concrete, wood, metal, fiberglass, plastic, glass and more. It can be purchased separately and also as part of our LCR™ Basement Foundation Crack Repair Kit.

LCR Epoxy Repair Paste can be used to adhere tiles, make household repairs and as a bonding adhesive for hobby and craft projects. It is also an excellent material for anchoring, patching, grouting and crack repair.

TECHNICAL SPECIFICATIONS

• Mix Ratio: 1A:1B by volume
• Mixed Viscosity: Heavy Paste
• Working Time: 60 min. (100g)
• Thin Film Working Time: 1 Hour
• Full Cure Time: 16 Hours
• Shore Hardness: 81D
• Color: Grey
• Compressive Strength: 6,798 psi (ASTM D695)
• Compressive Modulus: 157 psi (ASTM D695)
• Tensile Strength: 2323 psi (ASTM D638)
• Elongation at Break: 0.35% (ASTM D638)
• Shrinkage: 0.0001 in./in.
• Heat Deflection Temp: 115 °F (46 °C) (ASTM C882)