GelFoam™ Injection Grout is an innovative and simple to use hydrophilic polyurethane resin system designed to provide the ultimate solution for crack repair and void grouting applications. In contact with water, GelFoam will expand up to 20 times its original volume creating a permanent, flexible and water tight seal. GelFoam eliminates the need for costly equipment and messy cleanups. GelFoam™ is a super low viscosity, single component resin that is ideal for sealing fine cracks.
TECHNICAL SPECIFICATIONS
Mix Ratio: 1A to 1 Part Water By Volume
Working Time: 60 sec.(73°F - 23°C)
Cure Time: 90 min. (73°F - 23°C)
Viscosity: 230 cps
Tensile Strength: 375 psi (ASTM D-1623)
Elongation: 410% (ASTM D-1623)
Shear Strength: 175 psi (ASTM D-273)
Color: Milky White
Description
GelFoam™ Injection Grout is an innovative and simple to use hydrophilic polyurethane resin system designed to provide the ultimate solution for crack repair and void grouting applications. In contact with water, GelFoam will expand up to 20 times its original volume creating a permanent, flexible and water tight seal. GelFoam eliminates the need for costly equipment and messy cleanups. GelFoam™ is a super low viscosity, single component resin that is ideal for sealing fine cracks.
ADVANTAGES
Creates a Flexible Foam Seal
Solvent Free
Toluene Diisocyanate (TDI) Free
No Expensive Dispensing Equipment Needed
Bonds to Most Dry Surfaces
RECOMMENDED USES
GelFoam is excellent for sealing cracks and joints that leak or exhibit movement. It is ideal for use for:
Foundation Cracks
Rock Voids & Pockets
Pipe Penetrations
Concrete Tie Holes
Pre-Cast Section Seems
Floor & Wall Joints
Videos
Technical Specifications
Typical Properties. All values measured after 7 days at 73°F (23°C).
