Super Low Viscosity Urethane Grout
POLYFOAM-SLV is an extremely low viscosity polyurethane injection resin designed to permanently seal leaks in concrete and masonry structures. Immediately upon contact with water, POLYFOAM-SLV rapidly expands and forms a tough, flexible, closed-cell foam that can not be penetrated by water or other liquids. ACTIVATOR INCLUDED
- Single component
- Super-low viscosity
- Solvent free
- Extremely flexible
- Resist many chemicals
- Closed cell foam
- Potable Water Approved
- Expansion Joints
- Swimming Pools
- Foundation walls
- Elevator pits
- Tunnels and subways
- Cold joints
- Concrete dams
- Water holding tanks
- Parking decks
- Drill injection port holes 6” to 24” apart at a 45°angle to intersect the crack at 1/2 the crack depth.
- Clean holes and install injection ports leaving injection tips off of ports.
- Install injection tip on 1st port and Inject POLYFOAM-SLV until resin appears at next higher port.
- Repeat step 3 on next higher port until entire crack has been fully injected with POLYFOAM-SLV (Consult Polygems Technical department for further detailed repair procedures)
1 Gallon Kit with 4 oz of Activator
5 Gallon Kits with 1 Pint (16 oz) of Activator