Product Description: #519 High-Temperature Ceramic Tile Adhesive is our industry standard epoxy tile adhesive for use in environments up to 400°F. The #519 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The #519 is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. #519 is moisture resistant and will even cure underwater.
Advantages
Heat Resistant
Excellent Adhesion to most Surfaces
No VOCs or Solvents
Tough and Durable Surface
Chemical and Solvent Resistant
Water Clean-up Formulation
Uses
Typical application and uses are:
Ceramic Tile Adhesive
All Purpose Bonding
Crack & Joint repair
Patching and repairing
Application Instructions:
Surfaces to be sealed should be clean of dirt, oils, surface water and loose paint or coatings.
Prepare and clean surface by grinding or sanding to provide clean and open surface.
Thoroughly mix measured amounts of 1 part of Part-A Resin with 1 part of Part-B Hardener by volume until streak free. Scrape side and bottom of pail frequently during mixing to insure a good mix. Mix only enough that can be applied in 45 minutes.
Spread mixed epoxy with trowel. a cloth or sponge dampened with water can be used to smooth epoxy surface. Clean up any un-cured epoxy with warm soapy water or solvent.