519HT High Temp Ceramic Tile Adhesive™ is our industry standard epoxy tile adhesive for use in environments up to 400°F (204°C). 519HT is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. 519HT is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. 519HT is moisture resistant and will even cure underwater.
TECHNICAL SPECIFICATIONS
Mix Ratio: 1A:1B by volume
Mixed Viscosity: Heavy Gel (ASTM D2393)
Pot Life: 30 min. (100g)
Shore Hardness: 80D
Color: Dark Grey
Part A: Charcoal | Part B: Tan
VOC Content: 0%
Thin Film Working Time: 45 mins.
Cure Time @ 1/8 in. (3.17 mm.): 16 hrs.
Cure Time @ 1/4 in. (6.35 mm.): 5 hrs.
Compressive Strength: 14,000 psi (ASTM D-638)
Tensile Strength: 6,000 psi (ASTM D-638)
Impact (IZOD) Strength: 21 ft. lbs. (ASTM D-638)
Operating Temperature: 350-400°F (177-204°C)
Description
519HT High Temp Ceramic Tile Adhesive™ is our industry standard epoxy tile adhesive for use in environments up to 400°F (204°C). 519HT is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. 519HT is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. 519HT is moisture resistant and will even cure underwater.
ADVANTAGES
High Heat Resistance [400°F (204°C)]
Excellent Adhesion to Most Surfaces
Bonds to Itself
Chemical Resistant
Solvent Resistant
Moisture Resistant (Will Cure Underwater)
Creates a Tough, Durable Surface
No VOCs or Solvents
Easy Water Clean-up
RECOMMENDED USES
For adhering, patching, crack and joint repair as well as general bonding in high temp abrasive environments.
Adhere Ceramic Tiles
Crack & Joint Repair
Patching & Filleting
General Purpose Bonding
Videos
Technical Specifications
Typical Properties. All values measured after 7 days at 73°F (23°C).
