Extra Thick Modeling and Sculpting Epoxy Putty Please Note: EZ-Sculpt has been renamed to 307 Stone.
307 Stone™ Sculpting Epoxy is a 100% solids epoxy system specially formulated to a workable “clay-like” consistency for sculpting and modeling projects. 307 Stone will cure to an extremely strong and durable plastic with a slightly textured stone-like surface that can be easily sanded or shaped. 307 Stone is easy to mix and apply by hand or with a trowel or spatula. It can be tinted, painted or even stained.
TECHNICAL SPECIFICATIONS
Mix Ratio: 1A:1B by volume
Mixed Viscosity: Clay-like
Working Time: 1 Hour (100 gms)
Cure Time: 8 Hours
Mixed Color: Gray (color may vary)
Description
307 Stone™ Sculpting Epoxy is a 100% solids epoxy
system specially formulated to a workable 'clay-like'
consistency for sculpting and modeling projects. 307
Stone will cure to an extremely strong and durable
plastic with a slightly textured stone-like surface that can
be easily sanded or shaped.
WORKING FEATURES & BENEFITS
307 Stone is easy to mix and apply by hand or with a trowel
or spatula. It can be tinted, painted or even stained.
Can be Smoothed with Water
Can be Sculpted, Stamped or Textured
Bonds to Itself and Many Other Substrates
Can be Sculpted, Stamped or Textured
Easy to Pigment
Holds Intricate Detail Well
Will not Melt or Dissolve Foam Surfaces
Easy Cleanup with Water
Videos
Technical Specifications
Typical Properties. All values measured after 7 days at 73°F (23°C).
Mix Ratio: 1A:1B by volume
Mixed Viscosity: Clay-Like
Pot Life: 3 Hours
Cure Time: 8 Hours
Shore Hardness: 75D
Mixed Color: Gray, color may vary
Elongation at Break: 1.9% (ASTM D638)
Compressive Strength: 2,430 psi (ASTM D695)
Compressive Modulus: 20 ksi (ASTM D695)
Tensile Strength: 988 psi (ASTM D638)
Flexural Strength: 1,886 psi (ASTM D790)
Flexural Modulus: 64.6 ksi (ASTM D790)
Specific Volume: Mixed - 17.95 cu in/lb (ASTM D79)
