Clay-like, lightweight and carvable 100% solids epoxy system.
307FR Lite II™ is a lightweight, two-component trowelable epoxy system that is E-84 Class A Flame-Rated and public space safe- It has an easy-to-mix, “paste-like” consistency that is commonly used for general fabrication, coating, sculpting, patching, filling, joining, and repair. It contains no VOCs and is solvent-free. 307FR Lite II cures to a hard, strong, durable material suitable for interior and exterior spaces and themed environments.
TECHNICAL SPECIFICATIONS
Mix Ratio: 1A:1B by volume
Mixed Viscosity: Paste
Working Time:
Spreadable: 1 Hour
Stampable: 2 Hours
Sculptable: 3 Hours
Cure Time: 16 Hrs.
Shore Hardness: 77D
Color: Light Brown/Tan (color may vary)
Description
307FR Lite II™ is a lightweight, two-component trowelable
epoxy system that is E-84 Class A Flame-Rated and public
space safe- It has an easy-to-mix, “paste-like” consistency
that is commonly used for general fabrication, coating,
sculpting, patching, filling, joining, and repair. It contains
no VOCs and is solvent-free. 307FR Lite II cures to a hard,
strong, durable material suitable for interior and exterior
spaces and themed environments.
WORKING FEATURES & BENEFITS
07FR Lite II is easy to mix and apply by hand or with a
trowel or spatula.
Easy to Manipulate
Can be Smoothed With Water
Videos
Technical Specifications
Typical Properties. All values measured after 7 days at 73°F (23°C).
Mix Ratio: 1A:1B by volume
Mixed Viscosity: Paste
Working Time:
Spreadable: 1 Hour
Stampable: 2 Hours
Sculptable: 3 Hours
Cure Time: 16 Hours
Shore Hardness: 77D
Shelf Life: 24 Mos.*
Color: Light Brown/Tan (Color may vary)
PART A: Brown | PART B: Off-White
Heat Deflection Temp: 115°F (46°C) (ASTM D648)
Compressive Strength: 11,500 psi (ASTM D695)
Tensile Strength: 2,100 psi (ASTM D638)
Specific Volume: 19.10 cu. in./lb. (ASTM D1475)
Properties are based on the mixed material without Polygem Thickener.
