1002FS™ Epoxy Crack Paste is a fast-setting, epoxy paste designed for sealing cracked concrete prior to injection with epoxy or urethane resin systems. With a simple 1A to 1B mix ratio by volume, it is easy to use and will be ready for injection in as little as 25 minutes. 1002FS is ideal for setting injection ports and can also be used for patching concrete prior to top-coating. It bonds strongly to damp surfaces and will cure hard even on cold, wet walls. The thick, non-sag paste formula makes it excellent for vertical and overhead applications.
TECHNICAL SPECIFICATIONS
Pot Life: 4 min (100 g - ASTM D-2471)
Mix Ratio: 1A : 1 by volume
Tack Free Time: 10 min (100g)
Full Cure Time: 25 min.
Shore D Hardness: 83D (ASTM D2240)
Mixed Viscosity: Heavy Paste
Mixed Color: Warm Light Grey
Description
1002FS™ Epoxy Crack Paste is a fast-setting, epoxy paste designed for sealing cracked concrete prior to injection with epoxy or urethane resin systems. With a simple 1A to 1B mix ratio by volume, it is easy to use and will be ready for injection in as little as 25 minutes. 1002FS is ideal for setting injection ports and can also be used for patching concrete prior to top-coating. It bonds strongly to damp surfaces and will cure hard even on cold, wet walls. The thick, non-sag paste formula makes it excellent for vertical and overhead applications.
ADVANTAGES
Easy to Mix
Will Bond to Wet Surfaces
Very Fast 4 Min. Work Time
25 Minute Cure
No VOCs or Solvents
RECOMMENDED USES
1002FS Epoxy Crack Paste is used primarily for the setting of injection ports and sealing crack surfaces. It is ideal to use for:
Concrete Patching
Sea Wall or Underwater Concrete Repair
Epoxy & Urethane Injection for repairing Concrete
Videos
Technical Specifications
Typical Properties. All values measured after 7 days at 73°F (23°C).
