Welcome back!
Log In

Polyfoam 1C - Polyurethane Injection Grout

$18.00$314.75

Polyurethane Injection Grout

Product Description:

POLYFOAM 1-C is an innovative blend of hydrophilic/hydrophobic polyurethane resins designed to provide the ultimate solution for crack repair and void grouting applications. In contact with water, POLYFOAM 1-C will expand up to 20 times its original volume creating a permanent, flexible and water-tight seal.  POLYFOAM 1-C eliminates the need for costly equipment and messy cleanups. POLYFOAM 1-C is packaged in unique 10 fl. oz. caulk-style cartridges that easily dispensed in any standard caulk gun!

Advantages

  •  Very flexible foam seal
  • 20 times original volume expansion
  •  No mixing or expensive dispensing equipment
  •  Single 10 oz. cartridge fits in ordinary caulk guns
  •  Bonds to most wet or dry surfaces

Uses

For the sealing of cracks and joints that leak or exhibit movement.

  • Foundation Cracks
  • Fill voids and Rock Pockets
  • Pipe Penetrations
  • Concrete Tie Holes
  • Pre-Cast Section Seams
  • Floor/Wall Joints
Application Instructions:
  1. Prepare crack by setting injection ports and sealing crack with a fast-setting paste epoxy.
  2. Remove red cap and cut 1/8” max. off the tip or puncture tip with small diameter nail.
  3. Put cartridge in caulk gun and place cartridge tip into injection port.
  4. Slowly dispense resin into injection port using low pressure to ensure maximum foam development.  Allow resin/foam to rise into adjacent or next higher port.  Cap filled port and repeat dispensing procedure into the next port until all injection ports are filled.
  5. Re-cap cartridge to preserve any unused resin.
Packaging:

10 oz. Single Cartridges, 22 oz Dual Cartridges,   1 Gallon, 5 Gallon

Read More
Visa Mastercard American Express PayPal Diners Club Discover
Overview
Additional Info
Data Sheets

Polyurethane Injection Grout

Product Description:

POLYFOAM 1-C is an innovative blend of hydrophilic/hydrophobic polyurethane resins designed to provide the ultimate solution for crack repair and void grouting applications. In contact with water, POLYFOAM 1-C will expand up to 20 times its original volume creating a permanent, flexible and water-tight seal.  POLYFOAM 1-C eliminates the need for costly equipment and messy cleanups. POLYFOAM 1-C is packaged in unique 10 fl. oz. caulk-style cartridges that easily dispensed in any standard caulk gun!

Advantages

  •  Very flexible foam seal
  • 20 times original volume expansion
  •  No mixing or expensive dispensing equipment
  •  Single 10 oz. cartridge fits in ordinary caulk guns
  •  Bonds to most wet or dry surfaces

Uses

For the sealing of cracks and joints that leak or exhibit movement.

  • Foundation Cracks
  • Fill voids and Rock Pockets
  • Pipe Penetrations
  • Concrete Tie Holes
  • Pre-Cast Section Seams
  • Floor/Wall Joints
Application Instructions:
  1. Prepare crack by setting injection ports and sealing crack with a fast-setting paste epoxy.
  2. Remove red cap and cut 1/8” max. off the tip or puncture tip with small diameter nail.
  3. Put cartridge in caulk gun and place cartridge tip into injection port.
  4. Slowly dispense resin into injection port using low pressure to ensure maximum foam development.  Allow resin/foam to rise into adjacent or next higher port.  Cap filled port and repeat dispensing procedure into the next port until all injection ports are filled.
  5. Re-cap cartridge to preserve any unused resin.
Packaging:

10 oz. Single Cartridges, 22 oz Dual Cartridges,   1 Gallon, 5 Gallon

Read More

Additional information

Weight N/A
Dimensions N/A
Size

10 oz, 22 oz, 1 Gallon, 5 Gallon

Repairs

Epoxy for all of your repair needs >

Flooring

Shop Flooring Options >

You May Also Like

© 2024 Polygem 
cartcross linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram