Welcome back!
Log In

1257 Epoxy Anchoring Adhesive

$25.50

Epoxy Chemical Anchoring Adhesive - 22 oz. Dual Cartridge

Product Description:

 #1257 is a 100% solids non-sag gel viscosity epoxy specially formulated for use as general adhesive to provide the ultimate in adhesion to a variety of substrates.  #1257 will bond to concrete, wood, fiberglass and metal surfaces.  #1257 is moisture insensitive and resistant to most chemicals and solvents. #1257 is also excellent as a  epoxy mortar grout for patching or filling large cavity anchoring holes. (Dual Dispensing Gun Required)

Advantages

  • No VOC's or solvants
  • Easy mixing
  • User-friendly

Uses

  • Dowel bar or threaded rod anchoring
  • Hollow block sleeve anchoring
  • Vertical or overhead application
  • Crack repair
  • Epoxy mortars or grouts
Application Instructions:

 #1257 can be applied by dual-cartridge or bulk applicators

  1. Clean anchor hole by wire brushing the sides of the hole and vacuuming or blowing loose material from the hole
  2. Follow dispensing instructions for the cartridge or bulk dispensing machine
  3. Start filling the hole from the back towards the surface of the hole
  4. Dispense enough material that there is a small amount of overflow when anchor is fully inserted

(Rule of thumb is anchor hole is to be a minimum of 9x’s deep as the anchor diameter)

Packaging:

22 oz. Dual Cartridges, 2 Gallon, 10 Gallon and 100 Gallon Kits.

Read More
Visa Mastercard American Express PayPal Diners Club Discover
Overview
Additional Info
Data Sheets

Epoxy Chemical Anchoring Adhesive - 22 oz. Dual Cartridge

Product Description:

 #1257 is a 100% solids non-sag gel viscosity epoxy specially formulated for use as general adhesive to provide the ultimate in adhesion to a variety of substrates.  #1257 will bond to concrete, wood, fiberglass and metal surfaces.  #1257 is moisture insensitive and resistant to most chemicals and solvents. #1257 is also excellent as a  epoxy mortar grout for patching or filling large cavity anchoring holes. (Dual Dispensing Gun Required)

Advantages

  • No VOC's or solvants
  • Easy mixing
  • User-friendly

Uses

  • Dowel bar or threaded rod anchoring
  • Hollow block sleeve anchoring
  • Vertical or overhead application
  • Crack repair
  • Epoxy mortars or grouts
Application Instructions:

 #1257 can be applied by dual-cartridge or bulk applicators

  1. Clean anchor hole by wire brushing the sides of the hole and vacuuming or blowing loose material from the hole
  2. Follow dispensing instructions for the cartridge or bulk dispensing machine
  3. Start filling the hole from the back towards the surface of the hole
  4. Dispense enough material that there is a small amount of overflow when anchor is fully inserted

(Rule of thumb is anchor hole is to be a minimum of 9x’s deep as the anchor diameter)

Packaging:

22 oz. Dual Cartridges, 2 Gallon, 10 Gallon and 100 Gallon Kits.

Read More

Additional information

Weight 2 lbs

Repairs

Epoxy for all of your repair needs >

Flooring

Shop Flooring Options >

You May Also Like

© 2024 Polygem 
cartcross linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram